Dennis Linson is a friend of ours from Hunter Engineering.  He has pretty much done away with everything Chevy II about this car and has built everything from scratch.  The frame and suspension are of his own design.  All the design work on this car was completed using Pro-Engineer Cad Software.  A complete model of the full tube chassis and suspension, along with a model of the 427 Big Block Chevy and 6-Speed T-56 Borg Warner transmission.  The car is very near completion thanks to the generous donations from the sponsors listed below.

Old News and Updates

4-14-07 -- Painting is complete and the car is finally in one piece.

4-14-07 -- New Page layout

1-01-07 -- The 427 has been completely rebuilt after a crack was found in the cylinder block

5-22-03 -- Painting has begun, check out the Yellow in the Body section.